diff --git a/.cspell/custom-dictionary-workspace.txt b/.cspell/custom-dictionary-workspace.txt
index f9fb0df..192ae40 100644
--- a/.cspell/custom-dictionary-workspace.txt
+++ b/.cspell/custom-dictionary-workspace.txt
@@ -5,6 +5,7 @@ certmanager
 containo
 coredns
 crds
+dnsmasq
 envsubst
 externaldns
 glddns
diff --git a/bin/install-dnsmasq b/bin/install-dnsmasq
new file mode 100755
index 0000000..2d8e43b
--- /dev/null
+++ b/bin/install-dnsmasq
@@ -0,0 +1,134 @@
+#!/bin/bash
+
+# Setup.
+
+set -e
+set -o pipefail
+
+# Function to process a file with gomplate.
+process_file() {
+    local src_file="$1"
+    local dest_file="$2"
+    
+    if [[ "${src_file}" == *.yaml ]] || [[ "${src_file}" == *.ipxe ]] || [[ "${src_file}" == *.conf ]]; then
+        echo "Processing YAML file: ${dest_file}"
+        gomplate -d config=.wildcloud/config.yaml -f "${src_file}" > "${dest_file}"
+    else
+        cp "${src_file}" "${dest_file}"
+    fi
+}
+
+
+# Initialize wildcloud environment.
+
+# Ensure we have a .wildcloud directory.
+if [ ! -d ".wildcloud" ]; then
+    echo "Error: .wildcloud directory not found in current directory"
+    echo "This script must be run from a directory that contains a .wildcloud directory"
+    exit 1
+fi
+
+# Ensure we have a config file.
+if [ ! -f ".wildcloud/config.yaml" ]; then
+    echo "Error: .wildcloud/config.yaml not found"
+    exit 1
+fi
+
+WILDCLOUD_CACHE_DIR=".wildcloud/cache"
+
+# Find the wildcloud repository path from the config file.
+WILDCLOUD_REPO=$(yq eval '.wildcloud.repository' .wildcloud/config.yaml)
+if [ -z "${WILDCLOUD_REPO}" ] || [ "${WILDCLOUD_REPO}" = "null" ]; then
+    echo "Error: wildcloud.repository not found in .wildcloud/config.yaml"
+    exit 1
+fi
+
+# The source templates for asq setup.
+DNSMASQ_TEMPLATE_DIR="${WILDCLOUD_REPO}/infrastructure_setup/dnsmasq"
+if [ ! -d "${DNSMASQ_TEMPLATE_DIR}" ]; then
+    echo "Error: DNSMasq setup directory not found at ${DNSMASQ_TEMPLATE_DIR}"
+    exit 1
+fi
+
+# Where to put the processed DNSMasq files.
+DNSMASQ_SETUP_DIR="cluster/dnsmasq"
+mkdir -p $DNSMASQ_SETUP_DIR
+
+# Optionally remove the setup directory if it already exists.
+if [ -d "${DNSMASQ_SETUP_DIR}" ]; then
+    echo "Warning: Destination directory ${DNSMASQ_SETUP_DIR} already exists"
+    read -p "Do you want to overwrite it? (y/N): " -n 1 -r
+    echo
+    if [[ ! $REPLY =~ ^[Yy]$ ]]; then
+        echo "Installation cancelled"
+        exit 1
+    fi
+    rm -rf "${DNSMASQ_SETUP_DIR}"
+fi
+
+# Compile templates to setup directory.
+find "${DNSMASQ_TEMPLATE_DIR}" -type d | while read -r src_dir; do
+    rel_path="${src_dir#${DNSMASQ_TEMPLATE_DIR}}"
+    rel_path="${rel_path#/}"  # Remove leading slash if present
+    if [ -n "${rel_path}" ]; then
+        mkdir -p "${DNSMASQ_SETUP_DIR}/${rel_path}"
+    fi
+done
+
+find "${DNSMASQ_TEMPLATE_DIR}" -type f | while read -r src_file; do
+    rel_path="${src_file#${DNSMASQ_TEMPLATE_DIR}}"
+    rel_path="${rel_path#/}"  # Remove leading slash if present
+    dest_file="${DNSMASQ_SETUP_DIR}/${rel_path}"
+    
+    # Ensure destination directory exists
+    dest_dir=$(dirname "${dest_file}")
+    mkdir -p "${dest_dir}"
+    
+    process_file "${src_file}" "${dest_file}"
+done
+
+echo "Successfully created dnsmasq setup files from templates."
+
+# Create Talos bare metal boot assets. 
+echo "Creating Talos bare metal boot assets..."
+TALOS_ID=$(curl -X POST --data-binary @${DNSMASQ_TEMPLATE_DIR}/bare-metal.yaml https://factory.talos.dev/schematics | jq -r '.id')
+if [ -z "${TALOS_ID}" ] || [ "${TALOS_ID}" = "null" ]; then
+    echo "Error: Failed to create Talos bare metal boot assets"
+    exit 1
+fi
+echo "Successfully created Talos bare metal boot assets with ID: ${TALOS_ID}"
+
+# Download Talos kernel and initramfs.
+echo "Downloading Talos kernel and initramfs for PXE boot..."
+NODE_IMAGES_DIR="${WILDCLOUD_CACHE_DIR}/pxe-web-root"
+mkdir -p "${NODE_IMAGES_DIR}"
+cp "${DNSMASQ_SETUP_DIR}/boot.ipxe" "${NODE_IMAGES_DIR}/boot.ipxe"
+mkdir -p "${NODE_IMAGES_DIR}/amd64"
+
+# Get Talos version from config
+TALOS_VERSION=$(yq eval '.cluster.nodes.talos.version' .wildcloud/config.yaml)
+if [ -z "${TALOS_VERSION}" ] || [ "${TALOS_VERSION}" = "null" ]; then
+    echo "Error: .cluster.nodes.talos.version not found in .wildcloud/config.yaml"
+    exit 1
+fi
+
+# Download kernel if not already exists
+if [ ! -f "${NODE_IMAGES_DIR}/amd64/vmlinuz" ]; then
+    echo "Downloading Talos kernel..."
+    wget -O "${NODE_IMAGES_DIR}/amd64/vmlinuz" "https://pxe.factory.talos.dev/image/${TALOS_ID}/${TALOS_VERSION}/kernel-amd64"
+else
+    echo "Talos kernel already exists, skipping download"
+fi
+
+# Download initramfs if not already exists
+if [ ! -f "${NODE_IMAGES_DIR}/amd64/initramfs.xz" ]; then
+    echo "Downloading Talos initramfs..."
+    wget -O "${NODE_IMAGES_DIR}/amd64/initramfs.xz" "https://pxe.factory.talos.dev/image/${TALOS_ID}/${TALOS_VERSION}/initramfs-amd64.xz"
+else
+    echo "Talos initramfs already exists, skipping download"
+fi
+
+# Copy files to dnsmasq server.
+echo "Copying DNSMasq setup files to dnsmasq server..."
+scp -r "${DNSMASQ_SETUP_DIR}"/* root@192.168.8.50:/tmp/dnsmasq-setup/
+scp -r "${NODE_IMAGES_DIR}"/* root@192.168.8.50:/tmp/dnsmasq-setup/pxe-web-root/
diff --git a/docs/SETUP.md b/docs/SETUP.md
index a2d16d1..4db675b 100644
--- a/docs/SETUP.md
+++ b/docs/SETUP.md
@@ -1,38 +1,10 @@
-# Setting Up Your Personal Cloud
+# Setting Up Your Wild Cloud
 
-Welcome to your journey toward digital independence! This guide will walk you through setting up your own personal cloud infrastructure using Kubernetes, providing you with privacy, control, and flexibility.
+## Set up your cloud bootstrapper
 
-## Hardware Recommendations
+See [Dnsmasq Setup](./guides/dnsmasq-setup.md).
 
-For a pleasant experience, we recommend:
-
-- A dedicated mini PC, NUC, or old laptop with at least:
-  - 4 CPU cores
-  - 8GB RAM (16GB recommended)
-  - 128GB SSD (256GB or more recommended)
-- A stable internet connection
-- Optional: additional nodes for high availability
-
-## Initial Setup
-
-### 1. Prepare Environment Variables
-
-First, create your environment configuration:
-
-```bash
-# Copy the example file and edit with your details
-cp .env.example .env
-nano .env
-
-# Then load the environment variables
-source load-env.sh
-```
-
-Important variables to set in your `.env` file:
-
-- `DOMAIN`: Your domain name (e.g., `cloud.example.com`)
-- `EMAIL`: Your email for Let's Encrypt certificates
-- `CLOUDFLARE_API_TOKEN`: If using Cloudflare for DNS
+## Set up Control Nodes
 
 ### 2. Install K3s (Lightweight Kubernetes)
 
@@ -48,7 +20,7 @@ sudo cat /etc/rancher/k3s/k3s.yaml > ~/.kube/config
 chmod 600 ~/.kube/config
 ```
 
-### 3. Install Infrastructure Components
+## Install Infrastructure Components
 
 One command sets up your entire cloud infrastructure:
 
@@ -66,7 +38,7 @@ This installs and configures:
 - **ExternalDNS**: Updates DNS records automatically
 - **Kubernetes Dashboard**: Web UI for managing your cluster
 
-## Adding Additional Nodes (Optional)
+## Set up worker nodes
 
 For larger workloads or high availability, you can add more nodes:
 
diff --git a/docs/guides/armbian-setup.md b/docs/guides/armbian-setup.md
new file mode 100644
index 0000000..45f1e86
--- /dev/null
+++ b/docs/guides/armbian-setup.md
@@ -0,0 +1,48 @@
+# Setting up Ambian on a pi
+
+These are _raw_ notes. Instructions will need to be made friendly.
+
+## Hardware requirements
+
+- 32GB SD card
+- SD to USB adapter
+
+## Creating OS boot on SD
+
+### References
+
+- See [Armbian OS getting started](https://docs.armbian.com/User-Guide_Getting-Started/)
+- See [Orange Pi Zero 3 setup](https://www.armbian.com/orange-pi-zero-3/)
+
+### Steps
+
+Prepare image:
+
+- Download [OS image](https://www.armbian.com/download/).
+- Install [usbimager](https://gitlab.com/bztsrc/usbimager).
+- Insert SD card into USB adapter into ops computer.
+- Launch `USB Imager` and use it to write your downloaded image to the SD card. It might take an hour.
+- When written, copy infrastructure_setup/dnsmasq/.not_logged_in_yet to the sd's `root/` dir.
+
+Boot:
+
+- Put the SD card into the Pi and boot.
+- Set config options.
+- From your ops machine, ssh into the pi.
+- Run `armbian-install`
+  - Select the option to put the boot loader on the sdcard
+
+Configure:
+
+```bash
+# Block all suspend, hibernate, and sleep actions.
+sudo systemctl mask sleep.target suspend.target hibernate.target hybrid-sleep.target
+```
+
+Update:
+
+```bash
+wget -qO - https://apt.armbian.com/armbian.key | gpg --dearmor | sudo tee /usr/share/keyrings/armbian.gpg >/dev/null
+sudo apt update
+sudo apt upgrade
+```
diff --git a/docs/guides/dnsmasq-setup.md b/docs/guides/dnsmasq-setup.md
new file mode 100644
index 0000000..188606c
--- /dev/null
+++ b/docs/guides/dnsmasq-setup.md
@@ -0,0 +1,8 @@
+# Dnsmasq setup
+
+Steps:
+
+- Get some hardware. A $30 _Orange Pi Zero 3_ is good enough.
+- See [Armbian Setup](./armbian-setup.md).
+- From your wildcloud root, run `install-dnsmasq`. This will create the required installation files and copy them all to your dnsmasq server into `/tmp/dnsmasq-setup`.
+- ssh into your dnsmasq server and run `/tmp/dnsmasq-setup/setup.sh`.
diff --git a/docs/talos_setup.md b/docs/guides/talos-setup.md
similarity index 100%
rename from docs/talos_setup.md
rename to docs/guides/talos-setup.md
diff --git a/infrastructure_setup/dnsmasq/.not_logged_in_yet b/infrastructure_setup/dnsmasq/.not_logged_in_yet
new file mode 100644
index 0000000..8e39144
--- /dev/null
+++ b/infrastructure_setup/dnsmasq/.not_logged_in_yet
@@ -0,0 +1,32 @@
+# Network
+PRESET_NET_CHANGE_DEFAULTS="1"
+PRESET_NET_ETHERNET_ENABLED="1"
+PRESET_NET_WIFI_ENABLED="0"
+
+PRESET_NET_USE_STATIC="1"
+PRESET_NET_STATIC_IP="{{ (ds "config").cloud.dns.ip }}"
+PRESET_NET_STATIC_MASK="255.255.255.0"
+PRESET_NET_STATIC_GATEWAY="{{ (ds "config").cloud.router.ip }}"
+PRESET_NET_STATIC_DNS="{{ (ds "config").cloud.dns.ip }}"
+
+# For example:
+# PRESET_NET_STATIC_IP="192.168.8.50"
+# PRESET_NET_STATIC_MASK="255.255.255.0"
+# PRESET_NET_STATIC_GATEWAY="192.168.8.1"
+# PRESET_NET_STATIC_DNS="1.1.1.1"
+
+# System
+# SET_LANG_BASED_ON_LOCATION="y"
+# PRESET_LOCALE="en_US.UTF-8"
+# PRESET_TIMEZONE="Etc/UTC"
+
+# Root
+# PRESET_ROOT_PASSWORD="RootPassword"
+# PRESET_ROOT_KEY=""
+
+# User
+# PRESET_USER_NAME="armbian"
+# PRESET_USER_PASSWORD="UserPassword"
+# PRESET_USER_KEY=""
+# PRESET_DEFAULT_REALNAME="Armbian user"
+PRESET_USER_SHELL="bash"
diff --git a/infrastructure_setup/dnsmasq/bare-metal.yaml b/infrastructure_setup/dnsmasq/bare-metal.yaml
new file mode 100644
index 0000000..71d178a
--- /dev/null
+++ b/infrastructure_setup/dnsmasq/bare-metal.yaml
@@ -0,0 +1,7 @@
+customization:
+  extraKernelArgs:
+    - net.ifnames=0
+  systemExtensions:
+    officialExtensions:
+      - siderolabs/gvisor
+      - siderolabs/intel-ucode
diff --git a/infrastructure_setup/dnsmasq/boot.ipxe b/infrastructure_setup/dnsmasq/boot.ipxe
new file mode 100644
index 0000000..2106997
--- /dev/null
+++ b/infrastructure_setup/dnsmasq/boot.ipxe
@@ -0,0 +1,5 @@
+!ipxe
+imgfree
+kernel http://{{ (ds "config").cloud.dns.ip }}/amd64/vmlinuz talos.platform=metal console=tty0 init_on_alloc=1 slab_nomerge pti=on consoleblank=0 nvme_core.io_timeout=4294967295 printk.devkmsg=on ima_template=ima-ng ima_appraise=fix ima_hash=sha512 selinux=1 net.ifnames=0
+initrd http://{{ (ds "config").cloud.dns.ip }}/amd64/initramfs.xz
+boot
diff --git a/infrastructure_setup/dnsmasq/dnsmasq.conf b/infrastructure_setup/dnsmasq/dnsmasq.conf
new file mode 100644
index 0000000..d8db128
--- /dev/null
+++ b/infrastructure_setup/dnsmasq/dnsmasq.conf
@@ -0,0 +1,41 @@
+# Configuration file for dnsmasq.
+
+# Basic Settings
+interface={{ (ds "config").cloud.dnsmasq.interface }}
+listen-address={{ (ds "config").cloud.dns.ip }}
+domain-needed
+bogus-priv
+no-resolv
+
+# DNS Forwarding
+# local=/{{ (ds "config").cloud.domain }}/
+# address=/{{ (ds "config").cloud.domain }}/{{ (ds "config").cluster.endpointIp }}
+# local=/{{ (ds "config").cloud.internalDomain }}/
+# address=/{{ (ds "config").cloud.internalDomain }}/{{ (ds "config").cluster.endpointIp }}
+server=/{{ (ds "config").cloud.domain }}/{{ (ds "config").cluster.endpointIp }}
+server=/{{ (ds "config").cloud.internalDomain }}/{{ (ds "config").cluster.endpointIp }}
+server=1.1.1.1
+server=8.8.8.8
+
+# --- DHCP Settings ---
+dhcp-range={{ (ds "config").cloud.dhcpRange }},12h
+dhcp-option=3,{{ (ds "config").cloud.router.ip }} # gateway to assign
+dhcp-option=6,{{ (ds "config").cloud.dns.ip }} # dns to assign
+
+# --- PXE Booting ---
+enable-tftp
+tftp-root=/var/ftpd
+
+dhcp-match=set:efi-x86_64,option:client-arch,7
+dhcp-boot=tag:efi-x86_64,ipxe.efi
+dhcp-boot=tag:!efi-x86_64,undionly.kpxe
+
+dhcp-match=set:efi-arm64,option:client-arch,11
+dhcp-boot=tag:efi-arm64,ipxe-arm64.efi
+
+dhcp-userclass=set:ipxe,iPXE
+dhcp-boot=tag:ipxe,http://{{ (ds "config").cloud.dns.ip }}/boot.ipxe
+
+log-queries
+log-dhcp
+
diff --git a/infrastructure_setup/dnsmasq/dnsmasq.reference b/infrastructure_setup/dnsmasq/dnsmasq.reference
new file mode 100644
index 0000000..60aa6ca
--- /dev/null
+++ b/infrastructure_setup/dnsmasq/dnsmasq.reference
@@ -0,0 +1,706 @@
+# Configuration file for dnsmasq.
+#
+# Format is one option per line, legal options are the same
+# as the long options legal on the command line. See
+# "/usr/sbin/dnsmasq --help" or "man 8 dnsmasq" for details.
+
+# Listen on this specific port instead of the standard DNS port
+# (53). Setting this to zero completely disables DNS function,
+# leaving only DHCP and/or TFTP.
+#port=5353
+
+# The following two options make you a better netizen, since they
+# tell dnsmasq to filter out queries which the public DNS cannot
+# answer, and which load the servers (especially the root servers)
+# unnecessarily. If you have a dial-on-demand link they also stop
+# these requests from bringing up the link unnecessarily.
+
+# Never forward plain names (without a dot or domain part)
+domain-needed
+
+# Never forward addresses in the non-routed address spaces.
+bogus-priv
+
+# Uncomment these to enable DNSSEC validation and caching:
+# (Requires dnsmasq to be built with DNSSEC option.)
+#conf-file=%%PREFIX%%/share/dnsmasq/trust-anchors.conf
+#dnssec
+
+# Replies which are not DNSSEC signed may be legitimate, because the domain
+# is unsigned, or may be forgeries. Setting this option tells dnsmasq to
+# check that an unsigned reply is OK, by finding a secure proof that a DS 
+# record somewhere between the root and the domain does not exist. 
+# The cost of setting this is that even queries in unsigned domains will need
+# one or more extra DNS queries to verify.
+#dnssec-check-unsigned
+
+# Uncomment this to filter useless windows-originated DNS requests
+# which can trigger dial-on-demand links needlessly.
+# Note that (amongst other things) this blocks all SRV requests,
+# so don't use it if you use eg Kerberos, SIP, XMMP or Google-talk.
+# This option only affects forwarding, SRV records originating for
+# dnsmasq (via srv-host= lines) are not suppressed by it.
+filterwin2k
+
+# Change this line if you want dns to get its upstream servers from
+# somewhere other that /etc/resolv.conf
+#resolv-file=
+
+# By  default,  dnsmasq  will  send queries to any of the upstream
+# servers it knows about and tries to favour servers to are  known
+# to  be  up.  Uncommenting this forces dnsmasq to try each query
+# with  each  server  strictly  in  the  order  they   appear   in
+# /etc/resolv.conf
+#strict-order
+
+# If you don't want dnsmasq to read /etc/resolv.conf or any other
+# file, getting its servers from this file instead (see below), then
+# uncomment this.
+no-resolv
+
+# If you don't want dnsmasq to poll /etc/resolv.conf or other resolv
+# files for changes and re-read them then uncomment this.
+#no-poll
+
+# Add other name servers here, with domain specs if they are for
+# non-public domains.
+#server=/localnet/192.168.0.1
+
+# Example of routing PTR queries to nameservers: this will send all
+# address->name queries for 192.168.3/24 to nameserver 10.1.2.3
+#server=/3.168.192.in-addr.arpa/10.1.2.3
+
+# Add local-only domains here, queries in these domains are answered
+# from /etc/hosts or DHCP only.
+#local=/localnet/
+local=/{{ (ds "config").cloud.domain }}/
+local=/{{ (ds "config").cloud.internalDomain }}/
+
+# Add domains which you want to force to an IP address here.
+# The example below send any host in double-click.net to a local
+# web-server.
+#address=/double-click.net/127.0.0.1
+address=/{{ (ds "config").cloud.domain }}/{{ (ds "config").cluster.endpointIp }}
+address=/{{ (ds "config").cloud.internalDomain }}/{{ (ds "config").cluster.endpointIp }}
+
+# --address (and --server) work with IPv6 addresses too.
+#address=/www.thekelleys.org.uk/fe80::20d:60ff:fe36:f83
+
+# Add the IPs of all queries to yahoo.com, google.com, and their
+# subdomains to the vpn and search ipsets:
+#ipset=/yahoo.com/google.com/vpn,search
+
+# Add the IPs of all queries to yahoo.com, google.com, and their
+# subdomains to netfilters sets, which is equivalent to
+# 'nft add element ip test vpn { ... }; nft add element ip test search { ... }'
+#nftset=/yahoo.com/google.com/ip#test#vpn,ip#test#search
+
+# Use netfilters sets for both IPv4 and IPv6:
+# This adds all addresses in *.yahoo.com to vpn4 and vpn6 for IPv4 and IPv6 addresses.
+#nftset=/yahoo.com/4#ip#test#vpn4
+#nftset=/yahoo.com/6#ip#test#vpn6
+
+# You can control how dnsmasq talks to a server: this forces
+# queries to 10.1.2.3 to be routed via eth1
+# server=10.1.2.3@eth1
+
+# and this sets the source (ie local) address used to talk to
+# 10.1.2.3 to 192.168.1.1 port 55 (there must be an interface with that
+# IP on the machine, obviously).
+# server=10.1.2.3@192.168.1.1#55
+
+# If you want dnsmasq to change uid and gid to something other
+# than the default, edit the following lines.
+#user=
+#group=
+
+# If you want dnsmasq to listen for DHCP and DNS requests only on
+# specified interfaces (and the loopback) give the name of the
+# interface (eg eth0) here.
+# Repeat the line for more than one interface.
+interface=eth0
+
+# Or you can specify which interface _not_ to listen on
+#except-interface=
+# Or which to listen on by address (remember to include 127.0.0.1 if
+# you use this.)
+#listen-address=
+# If you want dnsmasq to provide only DNS service on an interface,
+# configure it as shown above, and then use the following line to
+# disable DHCP and TFTP on it.
+#no-dhcp-interface=
+
+# On systems which support it, dnsmasq binds the wildcard address,
+# even when it is listening on only some interfaces. It then discards
+# requests that it shouldn't reply to. This has the advantage of
+# working even when interfaces come and go and change address. If you
+# want dnsmasq to really bind only the interfaces it is listening on,
+# uncomment this option. About the only time you may need this is when
+# running another nameserver on the same machine.
+# bind-interfaces
+
+# If you don't want dnsmasq to read /etc/hosts, uncomment the
+# following line.
+#no-hosts
+# or if you want it to read another file, as well as /etc/hosts, use
+# this.
+#addn-hosts=/etc/banner_add_hosts
+
+# Set this (and domain: see below) if you want to have a domain
+# automatically added to simple names in a hosts-file.
+#expand-hosts
+
+# Set the domain for dnsmasq. this is optional, but if it is set, it
+# does the following things.
+# 1) Allows DHCP hosts to have fully qualified domain names, as long
+#     as the domain part matches this setting.
+# 2) Sets the "domain" DHCP option thereby potentially setting the
+#    domain of all systems configured by DHCP
+# 3) Provides the domain part for "expand-hosts"
+#domain=thekelleys.org.uk
+
+# Set a different domain for a particular subnet
+#domain=wireless.thekelleys.org.uk,192.168.2.0/24
+
+# Same idea, but range rather then subnet
+#domain=reserved.thekelleys.org.uk,192.68.3.100,192.168.3.200
+
+# Uncomment this to enable the integrated DHCP server, you need
+# to supply the range of addresses available for lease and optionally
+# a lease time. If you have more than one network, you will need to
+# repeat this for each network on which you want to supply DHCP
+# service.
+dhcp-range={{ (ds "config").cloud.dhcpRange }},12h
+
+# This is an example of a DHCP range where the netmask is given. This
+# is needed for networks we reach the dnsmasq DHCP server via a relay
+# agent. If you don't know what a DHCP relay agent is, you probably
+# don't need to worry about this.
+#dhcp-range=192.168.0.50,192.168.0.150,255.255.255.0,12h
+
+# This is an example of a DHCP range which sets a tag, so that
+# some DHCP options may be set only for this network.
+#dhcp-range=set:red,192.168.0.50,192.168.0.150
+
+# Use this DHCP range only when the tag "green" is set.
+#dhcp-range=tag:green,192.168.0.50,192.168.0.150,12h
+
+# Specify a subnet which can't be used for dynamic address allocation,
+# is available for hosts with matching --dhcp-host lines. Note that
+# dhcp-host declarations will be ignored unless there is a dhcp-range
+# of some type for the subnet in question.
+# In this case the netmask is implied (it comes from the network
+# configuration on the machine running dnsmasq) it is possible to give
+# an explicit netmask instead.
+#dhcp-range=192.168.0.0,static
+
+# Enable DHCPv6. Note that the prefix-length does not need to be specified
+# and defaults to 64 if missing/
+#dhcp-range=1234::2, 1234::500, 64, 12h
+
+# Do Router Advertisements, BUT NOT DHCP for this subnet.
+#dhcp-range=1234::, ra-only 
+
+# Do Router Advertisements, BUT NOT DHCP for this subnet, also try and
+# add names to the DNS for the IPv6 address of SLAAC-configured dual-stack 
+# hosts. Use the DHCPv4 lease to derive the name, network segment and 
+# MAC address and assume that the host will also have an
+# IPv6 address calculated using the SLAAC algorithm.
+#dhcp-range=1234::, ra-names
+
+# Do Router Advertisements, BUT NOT DHCP for this subnet.
+# Set the lifetime to 46 hours. (Note: minimum lifetime is 2 hours.)
+#dhcp-range=1234::, ra-only, 48h
+
+# Do DHCP and Router Advertisements for this subnet. Set the A bit in the RA
+# so that clients can use SLAAC addresses as well as DHCP ones.
+#dhcp-range=1234::2, 1234::500, slaac
+
+# Do Router Advertisements and stateless DHCP for this subnet. Clients will
+# not get addresses from DHCP, but they will get other configuration information.
+# They will use SLAAC for addresses.
+#dhcp-range=1234::, ra-stateless
+
+# Do stateless DHCP, SLAAC, and generate DNS names for SLAAC addresses
+# from DHCPv4 leases.
+#dhcp-range=1234::, ra-stateless, ra-names
+
+# Do router advertisements for all subnets where we're doing DHCPv6
+# Unless overridden by ra-stateless, ra-names, et al, the router 
+# advertisements will have the M and O bits set, so that the clients
+# get addresses and configuration from DHCPv6, and the A bit reset, so the 
+# clients don't use SLAAC addresses.
+#enable-ra
+
+# Supply parameters for specified hosts using DHCP. There are lots
+# of valid alternatives, so we will give examples of each. Note that
+# IP addresses DO NOT have to be in the range given above, they just
+# need to be on the same network. The order of the parameters in these
+# do not matter, it's permissible to give name, address and MAC in any
+# order.
+
+# Always allocate the host with Ethernet address 11:22:33:44:55:66
+# The IP address 192.168.0.60
+#dhcp-host=11:22:33:44:55:66,192.168.0.60
+
+# Always set the name of the host with hardware address
+# 11:22:33:44:55:66 to be "fred"
+#dhcp-host=11:22:33:44:55:66,fred
+
+# Always give the host with Ethernet address 11:22:33:44:55:66
+# the name fred and IP address 192.168.0.60 and lease time 45 minutes
+#dhcp-host=11:22:33:44:55:66,fred,192.168.0.60,45m
+
+# Give a host with Ethernet address 11:22:33:44:55:66 or
+# 12:34:56:78:90:12 the IP address 192.168.0.60. Dnsmasq will assume
+# that these two Ethernet interfaces will never be in use at the same
+# time, and give the IP address to the second, even if it is already
+# in use by the first. Useful for laptops with wired and wireless
+# addresses.
+#dhcp-host=11:22:33:44:55:66,12:34:56:78:90:12,192.168.0.60
+
+# Give the machine which says its name is "bert" IP address
+# 192.168.0.70 and an infinite lease
+#dhcp-host=bert,192.168.0.70,infinite
+
+# Always give the host with client identifier 01:02:02:04
+# the IP address 192.168.0.60
+#dhcp-host=id:01:02:02:04,192.168.0.60
+
+# Always give the InfiniBand interface with hardware address
+# 80:00:00:48:fe:80:00:00:00:00:00:00:f4:52:14:03:00:28:05:81 the
+# ip address 192.168.0.61. The client id is derived from the prefix
+# ff:00:00:00:00:00:02:00:00:02:c9:00 and the last 8 pairs of
+# hex digits of the hardware address.
+#dhcp-host=id:ff:00:00:00:00:00:02:00:00:02:c9:00:f4:52:14:03:00:28:05:81,192.168.0.61
+
+# Always give the host with client identifier "marjorie"
+# the IP address 192.168.0.60
+#dhcp-host=id:marjorie,192.168.0.60
+
+# Enable the address given for "judge" in /etc/hosts
+# to be given to a machine presenting the name "judge" when
+# it asks for a DHCP lease.
+#dhcp-host=judge
+
+# Never offer DHCP service to a machine whose Ethernet
+# address is 11:22:33:44:55:66
+#dhcp-host=11:22:33:44:55:66,ignore
+
+# Ignore any client-id presented by the machine with Ethernet
+# address 11:22:33:44:55:66. This is useful to prevent a machine
+# being treated differently when running under different OS's or
+# between PXE boot and OS boot.
+#dhcp-host=11:22:33:44:55:66,id:*
+
+# Send extra options which are tagged as "red" to
+# the machine with Ethernet address 11:22:33:44:55:66
+#dhcp-host=11:22:33:44:55:66,set:red
+
+# Send extra options which are tagged as "red" to
+# any machine with Ethernet address starting 11:22:33:
+#dhcp-host=11:22:33:*:*:*,set:red
+
+# Give a fixed IPv6 address and name to client with 
+# DUID 00:01:00:01:16:d2:83:fc:92:d4:19:e2:d8:b2
+# Note the MAC addresses CANNOT be used to identify DHCPv6 clients.
+# Note also that the [] around the IPv6 address are obligatory.
+#dhcp-host=id:00:01:00:01:16:d2:83:fc:92:d4:19:e2:d8:b2, fred, [1234::5] 
+
+# Ignore any clients which are not specified in dhcp-host lines
+# or /etc/ethers. Equivalent to ISC "deny unknown-clients".
+# This relies on the special "known" tag which is set when
+# a host is matched.
+#dhcp-ignore=tag:!known
+
+# Send extra options which are tagged as "red" to any machine whose
+# DHCP vendorclass string includes the substring "Linux"
+#dhcp-vendorclass=set:red,Linux
+
+# Send extra options which are tagged as "red" to any machine one
+# of whose DHCP userclass strings includes the substring "accounts"
+#dhcp-userclass=set:red,accounts
+
+# Send extra options which are tagged as "red" to any machine whose
+# MAC address matches the pattern.
+#dhcp-mac=set:red,00:60:8C:*:*:*
+
+# If this line is uncommented, dnsmasq will read /etc/ethers and act
+# on the ethernet-address/IP pairs found there just as if they had
+# been given as --dhcp-host options. Useful if you keep
+# MAC-address/host mappings there for other purposes.
+#read-ethers
+
+# Send options to hosts which ask for a DHCP lease.
+# See RFC 2132 for details of available options.
+# Common options can be given to dnsmasq by name:
+# run "dnsmasq --help dhcp" to get a list.
+# Note that all the common settings, such as netmask and
+# broadcast address, DNS server and default route, are given
+# sane defaults by dnsmasq. You very likely will not need
+# any dhcp-options. If you use Windows clients and Samba, there
+# are some options which are recommended, they are detailed at the
+# end of this section.
+
+# Override the default route supplied by dnsmasq, which assumes the
+# router is the same machine as the one running dnsmasq.
+#dhcp-option=3,1.2.3.4
+dhcp-option=3,{{ (ds "config").cluster.router.ip }}
+
+# Do the same thing, but using the option name
+#dhcp-option=option:router,1.2.3.4
+
+# Override the default route supplied by dnsmasq and send no default
+# route at all. Note that this only works for the options sent by
+# default (1, 3, 6, 12, 28) the same line will send a zero-length option
+# for all other option numbers.
+#dhcp-option=3
+
+# Set the NTP time server addresses to 192.168.0.4 and 10.10.0.5
+#dhcp-option=option:ntp-server,192.168.0.4,10.10.0.5
+
+# Send DHCPv6 option. Note [] around IPv6 addresses.
+#dhcp-option=option6:dns-server,[1234::77],[1234::88]
+# dhcp-option=option6:dns-server,{{ (ds "config").cluster.dns.ip }}
+
+# Send DHCPv6 option for namservers as the machine running 
+# dnsmasq and another.
+#dhcp-option=option6:dns-server,[::],[1234::88]
+
+# Ask client to poll for option changes every six hours. (RFC4242)
+#dhcp-option=option6:information-refresh-time,6h
+
+# Set option 58 client renewal time (T1). Defaults to half of the
+# lease time if not specified. (RFC2132)
+#dhcp-option=option:T1,1m
+
+# Set option 59 rebinding time (T2). Defaults to 7/8 of the
+# lease time if not specified. (RFC2132)
+#dhcp-option=option:T2,2m
+
+# Set the NTP time server address to be the same machine as
+# is running dnsmasq
+#dhcp-option=42,0.0.0.0
+
+# Set the NIS domain name to "welly"
+#dhcp-option=40,welly
+
+# Set the default time-to-live to 50
+#dhcp-option=23,50
+
+# Set the "all subnets are local" flag
+#dhcp-option=27,1
+
+# Send the etherboot magic flag and then etherboot options (a string).
+#dhcp-option=128,e4:45:74:68:00:00
+#dhcp-option=129,NIC=eepro100
+
+# Specify an option which will only be sent to the "red" network
+# (see dhcp-range for the declaration of the "red" network)
+# Note that the tag: part must precede the option: part.
+#dhcp-option = tag:red, option:ntp-server, 192.168.1.1
+
+# The following DHCP options set up dnsmasq in the same way as is specified
+# for the ISC dhcpcd in
+# https://web.archive.org/web/20040313070105/http://us1.samba.org/samba/ftp/docs/textdocs/DHCP-Server-Configuration.txt
+# adapted for a typical dnsmasq installation where the host running
+# dnsmasq is also the host running samba.
+# you may want to uncomment some or all of them if you use
+# Windows clients and Samba.
+#dhcp-option=19,0           # option ip-forwarding off
+#dhcp-option=44,0.0.0.0     # set netbios-over-TCP/IP nameserver(s) aka WINS server(s)
+#dhcp-option=45,0.0.0.0     # netbios datagram distribution server
+#dhcp-option=46,8           # netbios node type
+
+# Send an empty WPAD option. This may be REQUIRED to get windows 7 to behave.
+#dhcp-option=252,"\n"
+
+# Send RFC-3397 DNS domain search DHCP option. WARNING: Your DHCP client
+# probably doesn't support this......
+#dhcp-option=option:domain-search,eng.apple.com,marketing.apple.com
+
+# Send RFC-3442 classless static routes (note the netmask encoding)
+#dhcp-option=121,192.168.1.0/24,1.2.3.4,10.0.0.0/8,5.6.7.8
+
+# Send vendor-class specific options encapsulated in DHCP option 43.
+# The meaning of the options is defined by the vendor-class so
+# options are sent only when the client supplied vendor class
+# matches the class given here. (A substring match is OK, so "MSFT"
+# matches "MSFT" and "MSFT 5.0"). This example sets the
+# mtftp address to 0.0.0.0 for PXEClients.
+#dhcp-option=vendor:PXEClient,1,0.0.0.0
+
+# Send microsoft-specific option to tell windows to release the DHCP lease
+# when it shuts down. Note the "i" flag, to tell dnsmasq to send the
+# value as a four-byte integer - that's what microsoft wants. See
+# http://technet2.microsoft.com/WindowsServer/en/library/a70f1bb7-d2d4-49f0-96d6-4b7414ecfaae1033.mspx?mfr=true
+#dhcp-option=vendor:MSFT,2,1i
+
+# Send the Encapsulated-vendor-class ID needed by some configurations of
+# Etherboot to allow is to recognise the DHCP server.
+#dhcp-option=vendor:Etherboot,60,"Etherboot"
+
+# Send options to PXELinux. Note that we need to send the options even
+# though they don't appear in the parameter request list, so we need
+# to use dhcp-option-force here.
+# See http://syslinux.zytor.com/pxe.php#special for details.
+# Magic number - needed before anything else is recognised
+#dhcp-option-force=208,f1:00:74:7e
+# Configuration file name
+#dhcp-option-force=209,configs/common
+# Path prefix
+#dhcp-option-force=210,/tftpboot/pxelinux/files/
+# Reboot time. (Note 'i' to send 32-bit value)
+#dhcp-option-force=211,30i
+
+# Set the boot filename for netboot/PXE. You will only need
+# this if you want to boot machines over the network and you will need
+# a TFTP server; either dnsmasq's built-in TFTP server or an
+# external one. (See below for how to enable the TFTP server.)
+#dhcp-boot=pxelinux.0
+
+# The same as above, but use custom tftp-server instead machine running dnsmasq
+#dhcp-boot=pxelinux,server.name,192.168.1.100
+
+# Boot for iPXE. The idea is to send two different
+# filenames, the first loads iPXE, and the second tells iPXE what to
+# load. The dhcp-match sets the ipxe tag for requests from iPXE.
+#dhcp-boot=undionly.kpxe
+#dhcp-match=set:ipxe,175 # iPXE sends a 175 option.
+#dhcp-boot=tag:ipxe,http://boot.ipxe.org/demo/boot.php
+
+# For WildCloud cluster
+dhcp-match=set:efi-x86_64,option:client-arch,7
+dhcp-match=set:efi-arm64,option:client-arch,11
+dhcp-boot=tag:!efi-x86_64,undionly.kpxe
+dhcp-boot=tag:efi-x86_64,ipxe.efi
+dhcp-boot=tag:efi-arm64,ipxe-arm64.efi
+dhcp-userclass=set:ipxe,iPXE
+dhcp-boot=tag:ipxe,http://{{ (ds="config").cloud.dns.ip }}/boot.ipxe
+
+# Encapsulated options for iPXE. All the options are
+# encapsulated within option 175
+#dhcp-option=encap:175, 1, 5b         # priority code
+#dhcp-option=encap:175, 176, 1b       # no-proxydhcp
+#dhcp-option=encap:175, 177, string   # bus-id
+#dhcp-option=encap:175, 189, 1b       # BIOS drive code
+#dhcp-option=encap:175, 190, user     # iSCSI username
+#dhcp-option=encap:175, 191, pass     # iSCSI password
+
+# Test for the architecture of a netboot client. PXE clients are
+# supposed to send their architecture as option 93. (See RFC 4578)
+#dhcp-match=peecees, option:client-arch, 0 #x86-32
+#dhcp-match=itanics, option:client-arch, 2 #IA64
+#dhcp-match=hammers, option:client-arch, 6 #x86-64
+#dhcp-match=mactels, option:client-arch, 7 #EFI x86-64
+
+# Do real PXE, rather than just booting a single file, this is an
+# alternative to dhcp-boot.
+#pxe-prompt="What system shall I netboot?"
+# or with timeout before first available action is taken:
+#pxe-prompt="Press F8 for menu.", 60
+
+# Available boot services. for PXE.
+#pxe-service=x86PC, "Boot from local disk"
+
+# Loads <tftp-root>/pxelinux.0 from dnsmasq TFTP server.
+#pxe-service=x86PC, "Install Linux", pxelinux
+
+# Loads <tftp-root>/pxelinux.0 from TFTP server at 1.2.3.4.
+# Beware this fails on old PXE ROMS.
+#pxe-service=x86PC, "Install Linux", pxelinux, 1.2.3.4
+
+# Use bootserver on network, found my multicast or broadcast.
+#pxe-service=x86PC, "Install windows from RIS server", 1
+
+# Use bootserver at a known IP address.
+#pxe-service=x86PC, "Install windows from RIS server", 1, 1.2.3.4
+
+# If you have multicast-FTP available,
+# information for that can be passed in a similar way using options 1
+# to 5. See page 19 of
+# http://download.intel.com/design/archives/wfm/downloads/pxespec.pdf
+
+
+# Enable dnsmasq's built-in TFTP server
+enable-tftp
+
+# Set the root directory for files available via FTP.
+tftp-root=/var/ftpd
+
+# Do not abort if the tftp-root is unavailable
+#tftp-no-fail
+
+# Make the TFTP server more secure: with this set, only files owned by
+# the user dnsmasq is running as will be send over the net.
+#tftp-secure
+
+# This option stops dnsmasq from negotiating a larger blocksize for TFTP
+# transfers. It will slow things down, but may rescue some broken TFTP
+# clients.
+#tftp-no-blocksize
+
+# Set the boot file name only when the "red" tag is set.
+#dhcp-boot=tag:red,pxelinux.red-net
+
+# An example of dhcp-boot with an external TFTP server: the name and IP
+# address of the server are given after the filename.
+# Can fail with old PXE ROMS. Overridden by --pxe-service.
+#dhcp-boot=/var/ftpd/pxelinux.0,boothost,192.168.0.3
+
+# If there are multiple external tftp servers having a same name
+# (using /etc/hosts) then that name can be specified as the
+# tftp_servername (the third option to dhcp-boot) and in that
+# case dnsmasq resolves this name and returns the resultant IP
+# addresses in round robin fashion. This facility can be used to
+# load balance the tftp load among a set of servers.
+#dhcp-boot=/var/ftpd/pxelinux.0,boothost,tftp_server_name
+
+# Set the limit on DHCP leases, the default is 150
+#dhcp-lease-max=150
+
+# The DHCP server needs somewhere on disk to keep its lease database.
+# This defaults to a sane location, but if you want to change it, use
+# the line below.
+#dhcp-leasefile=/var/lib/misc/dnsmasq.leases
+
+# Set the DHCP server to authoritative mode. In this mode it will barge in
+# and take over the lease for any client which broadcasts on the network,
+# whether it has a record of the lease or not. This avoids long timeouts
+# when a machine wakes up on a new network. DO NOT enable this if there's
+# the slightest chance that you might end up accidentally configuring a DHCP
+# server for your campus/company accidentally. The ISC server uses
+# the same option, and this URL provides more information:
+# http://www.isc.org/files/auth.html
+#dhcp-authoritative
+
+# Set the DHCP server to enable DHCPv4 Rapid Commit Option per RFC 4039.
+# In this mode it will respond to a DHCPDISCOVER message including a Rapid Commit
+# option with a DHCPACK including a Rapid Commit option and fully committed address
+# and configuration information. This must only be enabled if either the server is 
+# the only server for the subnet, or multiple servers are present and they each
+# commit a binding for all clients.
+#dhcp-rapid-commit
+
+# Run an executable when a DHCP lease is created or destroyed.
+# The arguments sent to the script are "add" or "del",
+# then the MAC address, the IP address and finally the hostname
+# if there is one.
+#dhcp-script=/bin/echo
+
+# Set the cachesize here.
+#cache-size=150
+
+# If you want to disable negative caching, uncomment this.
+#no-negcache
+
+# Normally responses which come from /etc/hosts and the DHCP lease
+# file have Time-To-Live set as zero, which conventionally means
+# do not cache further. If you are happy to trade lower load on the
+# server for potentially stale date, you can set a time-to-live (in
+# seconds) here.
+#local-ttl=
+
+# If you want dnsmasq to detect attempts by Verisign to send queries
+# to unregistered .com and .net hosts to its sitefinder service and
+# have dnsmasq instead return the correct NXDOMAIN response, uncomment
+# this line. You can add similar lines to do the same for other
+# registries which have implemented wildcard A records.
+#bogus-nxdomain=64.94.110.11
+
+# If you want to fix up DNS results from upstream servers, use the
+# alias option. This only works for IPv4.
+# This alias makes a result of 1.2.3.4 appear as 5.6.7.8
+#alias=1.2.3.4,5.6.7.8
+# and this maps 1.2.3.x to 5.6.7.x
+#alias=1.2.3.0,5.6.7.0,255.255.255.0
+# and this maps 192.168.0.10->192.168.0.40 to 10.0.0.10->10.0.0.40
+#alias=192.168.0.10-192.168.0.40,10.0.0.0,255.255.255.0
+
+# Change these lines if you want dnsmasq to serve MX records.
+
+# Return an MX record named "maildomain.com" with target
+# servermachine.com and preference 50
+#mx-host=maildomain.com,servermachine.com,50
+
+# Set the default target for MX records created using the localmx option.
+#mx-target=servermachine.com
+
+# Return an MX record pointing to the mx-target for all local
+# machines.
+#localmx
+
+# Return an MX record pointing to itself for all local machines.
+#selfmx
+
+# Change the following lines if you want dnsmasq to serve SRV
+# records.  These are useful if you want to serve ldap requests for
+# Active Directory and other windows-originated DNS requests.
+# See RFC 2782.
+# You may add multiple srv-host lines.
+# The fields are <name>,<target>,<port>,<priority>,<weight>
+# If the domain part if missing from the name (so that is just has the
+# service and protocol sections) then the domain given by the domain=
+# config option is used. (Note that expand-hosts does not need to be
+# set for this to work.)
+
+# A SRV record sending LDAP for the example.com domain to
+# ldapserver.example.com port 389
+#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389
+
+# A SRV record sending LDAP for the example.com domain to
+# ldapserver.example.com port 389 (using domain=)
+#domain=example.com
+#srv-host=_ldap._tcp,ldapserver.example.com,389
+
+# Two SRV records for LDAP, each with different priorities
+#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,1
+#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,2
+
+# A SRV record indicating that there is no LDAP server for the domain
+# example.com
+#srv-host=_ldap._tcp.example.com
+
+# The following line shows how to make dnsmasq serve an arbitrary PTR
+# record. This is useful for DNS-SD. (Note that the
+# domain-name expansion done for SRV records _does_not
+# occur for PTR records.)
+#ptr-record=_http._tcp.dns-sd-services,"New Employee Page._http._tcp.dns-sd-services"
+
+# Change the following lines to enable dnsmasq to serve TXT records.
+# These are used for things like SPF and zeroconf. (Note that the
+# domain-name expansion done for SRV records _does_not
+# occur for TXT records.)
+
+#Example SPF.
+#txt-record=example.com,"v=spf1 a -all"
+
+#Example zeroconf
+#txt-record=_http._tcp.example.com,name=value,paper=A4
+
+# Provide an alias for a "local" DNS name. Note that this _only_ works
+# for targets which are names from DHCP or /etc/hosts. Give host
+# "bert" another name, bertrand
+#cname=bertrand,bert
+
+# For debugging purposes, log each DNS query as it passes through
+# dnsmasq.
+log-queries
+
+# Log lots of extra information about DHCP transactions.
+log-dhcp
+
+# Include another lot of configuration options.
+#conf-file=/etc/dnsmasq.more.conf
+#conf-dir=/etc/dnsmasq.d
+
+# Include all the files in a directory except those ending in .bak
+#conf-dir=/etc/dnsmasq.d,.bak
+
+# Include all files in a directory which end in .conf
+#conf-dir=/etc/dnsmasq.d/,*.conf
+
+# If a DHCP client claims that its name is "wpad", ignore that.
+# This fixes a security hole. see CERT Vulnerability VU#598349
+#dhcp-name-match=set:wpad-ignore,wpad
+#dhcp-ignore-names=tag:wpad-ignore
diff --git a/infrastructure_setup/dnsmasq/nginx.conf b/infrastructure_setup/dnsmasq/nginx.conf
new file mode 100644
index 0000000..60faa9b
--- /dev/null
+++ b/infrastructure_setup/dnsmasq/nginx.conf
@@ -0,0 +1,9 @@
+server {
+    listen 80;
+    server_name _;
+
+    location / {
+        autoindex on;
+        root /var/www/html/talos;
+    }
+}
diff --git a/infrastructure_setup/dnsmasq/setup.sh b/infrastructure_setup/dnsmasq/setup.sh
new file mode 100644
index 0000000..98b6bd9
--- /dev/null
+++ b/infrastructure_setup/dnsmasq/setup.sh
@@ -0,0 +1,58 @@
+#!/bin/bash
+
+# This file to be run on dnsmasq server
+
+echo "Updating APT repositories."
+sudo apt-get update
+
+echo "Installing dnsmasq and nginx."
+sudo apt install -y dnsmasq nginx
+
+DNSMASQ_SETUP_DIR="/tmp/dnsmasq-setup"
+NODE_IMAGES_DIR="${DNSMASQ_SETUP_DIR}/pxe-web-root"
+
+# Configure nginx.
+echo "Configuring nginx."
+sudo cp "${DNSMASQ_SETUP_DIR}/nginx.conf" /etc/nginx/sites-available/talos
+sudo chown www-data:www-data /etc/nginx/sites-available/talos
+sudo chmod -R 755 /etc/nginx/sites-available/talos
+
+# Copy assets to nginx web root
+echo "Copying Talos PXE boot assets to nginx web root."
+TALOS_PXE_WEB_ROOT="/var/www/html/talos"
+sudo mkdir -p "${TALOS_PXE_WEB_ROOT}"
+sudo rm -rf ${TALOS_PXE_WEB_ROOT}/* # Clean the web root directory
+sudo cp -r ${NODE_IMAGES_DIR}/* "${TALOS_PXE_WEB_ROOT}"
+sudo chown -R www-data:www-data "${TALOS_PXE_WEB_ROOT}"
+sudo chmod -R 755 "${TALOS_PXE_WEB_ROOT}"
+
+# Start nginx service to serve the iPXE script and images
+echo "Starting nginx service."
+sudo ln -s /etc/nginx/sites-available/talos /etc/nginx/sites-enabled/talos > /dev/null 2>&1 || true
+sudo rm -f /etc/nginx/sites-enabled/default
+sudo systemctl reload nginx
+
+# Stop and disable systemd-resolved if it is running
+if systemctl is-active --quiet systemd-resolved; then
+    echo "Stopping and disabling systemd-resolved..."
+    sudo systemctl disable systemd-resolved
+    sudo systemctl stop systemd-resolved
+    # sudo rm -f /etc/resolv.conf
+    echo "systemd-resolved stopped and disabled"
+fi
+
+# Update PXE's iPXE bootloader files.
+# TODO: Put download to cache first.
+echo "Updating iPXE ftpd bootloader files."
+sudo mkdir -p /var/ftpd
+sudo wget http://boot.ipxe.org/ipxe.efi -O /var/ftpd/ipxe.efi
+sudo wget http://boot.ipxe.org/undionly.kpxe -O /var/ftpd/undionly.kpxe
+sudo wget http://boot.ipxe.org/arm64-efi/ipxe.efi -O /var/ftpd/ipxe-arm64.efi
+
+
+# Finally, install and configure DNSMasq.
+echo "Configuring and starting DNSMasq."
+sudo cp "${DNSMASQ_SETUP_DIR}/dnsmasq.conf" /etc/dnsmasq.conf
+sudo systemctl restart dnsmasq
+
+echo "DNSMasq installation and configuration completed successfully."
diff --git a/my-scaffold/.wildcloud/config.example.yaml b/my-scaffold/.wildcloud/config.example.yaml
index 6ec7b83..4a5f581 100644
--- a/my-scaffold/.wildcloud/config.example.yaml
+++ b/my-scaffold/.wildcloud/config.example.yaml
@@ -33,3 +33,6 @@ cluster:
     cloudflare:
       domain: adam.tld
       ownerId: cloud-adam-cluster
+  nodes:
+    talos:
+      version: v1.10.3
diff --git a/my-scaffold/README.md b/my-scaffold/README.md
index 3a941c5..1f281f6 100644
--- a/my-scaffold/README.md
+++ b/my-scaffold/README.md
@@ -29,9 +29,9 @@ wild cluster apply
 ### Install Wild-Cloud apps
 
 ```bash
-wild apps list
-wild apps get <app>
-wild apps build <app>
-wild apps apply <app>
+wild-apps-list
+wild-app-fetch <app>
+wild-app-config <app>
+wild-app-deploy <app>
 # Optional: Check in app templates.
 ```